EN
NL
DE
CALCULATOR
Bar
Square
Rectangle
Rectangle
Tube
Hexagon
RESULT
Calculator version 1.1
Copyright © 2008 Elcas
No rights may be derived from the results of calculations
OUR STOCK BRASS
CuZn39Pb3 (CW614N)
| EN | DIN | ||||
| Alloy | CuZn39Pb3 | CuZn39Pb3 | |||
| MS58 | |||||
| Standard | EN 12164, EN 12167 | DIN 17660, DIN 17672 | |||
| Alloy number | CW614N | 2.0401 | |||
| Chemical composition | |||||
| Cu | 57,0 - 59,0 | 57,0 - 59,0 | |||
| Pb | 2,5 - 3,5 | 2,5 - 3,5 | |||
| Zn | rest | rest | |||
| kg/dm³ | ca. 8,5 | ||||
| Characteristics | High speed free machining brass. Most common used alloy. Very good machinability. | ||||
CuZn21Si3P (CW724R)
| EN | |||
| Alloy | CuZn21Si3P | ||
| Standard | EN 12164, EN 12167 | ||
| Alloy number | CW724R | ||
| Chemical composition | |||
| Cu | 75,0 - 77,0 | ||
| Zn | rest | ||
| Pb | 0,10 max. | ||
| Sn | 0,3 max. | ||
| Fe | 0,3 max. | ||
| Ni | 0,2 max. | ||
| Al | 0,05 max. | ||
| Mn | 0,05 max. | ||
| P | 0,02 - 0,10 | ||
| Si | 2,7 - 3,5 | ||
| kg/dm³ | ca. 8,3 | ||
| Characteristics | Ecobrass. This is a lead-free alloy. Good workability, high wear resistance, good recyclability, very good corrosion resistance and good malleability. Approved for drinking water applications | ||
CuZn37Mn3Al2PbSi (CW713R) | CuZn40Al2
| EN | DIN | ||||
| Alloy | CuZn37Mn3Al2PbSi | CuZn40Al2 | |||
| SoMs58Al2 | |||||
| Standard | EN 12164, EN 12167 | DIN 17660, DIN 17662 | |||
| Alloy number | CW713R | 2.0550 | |||
| Chemical composition | |||||
| Cu | 57,0 - 59,0 | 56,5 - 59,0 | |||
| Si | 0,3 - 1,3 | 0,3 - 1,0 | |||
| Zn | rest | rest | |||
| Al | 1,3 - 2,3 | 1,3 - 2,3 | |||
| Mn | 1,5 - 3,0 | 1,4 - 2,6 | |||
| Ni | 1,0 max. | 2,0 max. | |||
| Pb | 0,2 - 0,8 | 0,8 max. | |||
| Fe | 1,0 max. | 1,0 max. | |||
| Sn | 0,4 max. | 0,5 max. | |||
| kg/dm³ | ca. 8,1 | ||||
| Characteristics | High mechanical values and good wear resistance. | ||||
CuZn35Ni3Mn2AlPb (CW710R) | CuZn35Ni2
| DIN | EN | ||||
| Alloy | CuZn35Ni3Mn2AlPb | CuZn35Ni2 | |||
| SoMs59 | |||||
| Standard | EN 12163 | DIN 17660, DIN 17672 | |||
| Alloy number | CW710R | 2.0540 | |||
| Chemical composition | |||||
| Cu | 58,0 - 60,0 | 58,0 - 61,0 | |||
| Ni | 2,0 - 3,0 | 2,0 - 3,0 | |||
| Zn | rest | rest | |||
| Al | 0,3 - 1,3 | 0,3 - 1,5 | |||
| Mn | 1,5 - 2,5 | 1,5 - 2,5 | |||
| Pb | 0,2 - 0,8 | 0,8 max. | |||
| Fe | 0,5 max. | 0,5 max. | |||
| Sn | 0,5 max. | 0,5 max. | |||
| kg/dm³ | ca. 8,3 | ||||
| Characteristics | |||||
CuZn37 (CW508L)
| EN | DIN | ||||
| Alloy | CuZn37 | CuZn37 | |||
| MS63 | |||||
| Standard | EN 12163 | DIN 17660 | |||
| Alloy number | CW508L | 2.0321 | |||
| Chemical composition | |||||
| Cu | 62,0 - 64,0 | 62,0 - 64,0 | |||
| Zn | rest | rest | |||
| kg/dm³ | ca. 8,4 | ||||
| Characteristics | Most common brass for plates, suitable for simple forming. | ||||
CuZn25Al5Mn4Fe3-C (CC762S) | CuZn25Al5
| EN | DIN | ||||
| Alloy | CuZn25Al5Mn4Fe3-C | CuZn25Al5 | |||
| SoMs75 | |||||
| Standard | EN 1982 | DIN 1709 | |||
| Alloy number | CC762S | 2.0598 | |||
| Chemical composition | Mechanical properties | ||||
| Cu | 60,0 - 67,0 | 60,0 - 67,0 | EN | DIN | |
| Zn | rest | rest | Rm | ≥ 750 | ≥ 750 |
| Al | 3,0 - 7,0 | 3,0 - 7,0 | Rp 0,2 | ≥ 480 | ≥ 480 |
| Fe | 1,5 - 4,0 | 1,5 - 4,0 | A5 | ≥ 5 | ≥ 5 |
| Mn | 2,5 - 5,0 | 2,5 - 5,0 | HB | ≥ 190 | ≥ 190 |
| Ni | 3,0 max. | 3,0 max. | |||
| kg/dm³ | ca. 8,2 | ||||
| Condition | GZ | GZ / GC | |||
| Characteristics | Alloy suitable for high static loads at low circumferential speeds. | ||||
Downloads
Click the link below for an overview of available downloads. Eg. our ISO 9001:2015 certificaet, declaration of conformity for the food processing industry for Concast 954, our brochures and our general terms-and-conditions
Downloads >Links
Disclaimer >Privacy >
Contact
Elcas BVLinschotenstraat 59
3044AV Rotterdam
the Netherlands
| tel | +31 (0)10 462 77 99 |
| fax | +31 (0)10 262 36 11 |
| elcas@elcas.nl |
