EN
NL
DE
CALCULATOR
Bar
Square
Rectangle
Rectangle
Tube
Hexagon
RESULT
Calculator version 1.1
Copyright © 2008 Elcas
No rights may be derived from the results of calculations
ROUND BAR BRASS
CuZn39Pb3 (CW614N) | CuZn35Ni3Mn2AlPb (CW710R) | CuZn37Mn3Al2PbSi (CW713R)
✔ standard | ✚ non standard, stock availble
size (mm) |
CuZn39Pb3 (CW614N | MS58) |
CuZn35Ni3Mn2AlPb (CW710R) |
CuZn37Mn3Al2PbSi (CW713R) |
approx kg/m |
| 2 | ✔ | 0,0 | ||
| 3 | ✔ | 0,1 | ||
| 4 | ✔ | 0,1 | ||
| 5 | ✔ | 0,2 | ||
| 6 | ✔ | 0,2 | ||
| 7 | ✔ | 0,3 | ||
| 8 | ✔ | ✔ | 0,4 | |
| 9 | ✔ | 0,5 | ||
| 10 | ✔ | ✔ | ✔ | 0,7 |
| 11 | ✔ | 0,8 | ||
size (mm) |
CuZn39Pb3 (CW614N | MS58) |
CuZn35Ni3Mn2AlPb (CW710R) |
CuZn37Mn3Al2PbSi (CW713R) |
approx kg/m |
| 12 | ✔ | ✔ | ✔ | 1,0 |
| 13 | ✔ | 1,1 | ||
| 14 | ✔ | ✔ | 1,3 | |
| 15 | ✔ | ✔ | 1,5 | |
| 16 | ✔ | ✔ | ✔ | 1,7 |
| 17 | ✔ | 1,9 | ||
| 18 | ✔ | ✔ | ✔ | 2,2 |
| 19 | ✔ | 2,4 | ||
| 20 | ✔ | ✔ | ✔ | 2,7 |
size (mm) |
CuZn39Pb3 (CW614N | MS58) |
CuZn35Ni3Mn2AlPb (CW710R) |
CuZn37Mn3Al2PbSi (CW713R) |
approx kg/m |
| 21 | ✔ | 2,9 | ||
| 22 | ✔ | ✔ | ✔ | 3,2 |
| 23 | ✔ | 3,5 | ||
| 24 | ✔ | 3,9 | ||
| 25 | ✔ | ✔ | ✔ | 4,2 |
| 26 | ✔ | 4,5 | ||
| 27 | ✔ | 4,9 | ||
| 28 | ✔ | ✔ | 5,2 | |
| 29 | ✔ | 5,6 | ||
size (mm) |
CuZn39Pb3 (CW614N | MS58) |
CuZn35Ni3Mn2AlPb (CW710R) |
CuZn37Mn3Al2PbSi (CW713R) |
approx kg/m |
| 30 | ✔ | ✔ | ✔ | 6,0 |
| 32 | ✔ | ✔ | 6,8 | |
| 33 | ✔ | 7,3 | ||
| 34 | ✔ | 7,7 | ||
| 35 | ✔ | ✔ | 8,2 | |
| 36 | ✔ | ✔ | 8,7 | |
| 38 | ✔ | ✔ | 9,6 | |
| 40 | ✔ | ✔ | ✔ | 10,7 |
| 42 | ✔ | ✔ | 11,8 | |
size (mm) |
CuZn39Pb3 (CW614N | MS58) |
CuZn35Ni3Mn2AlPb (CW710R) |
CuZn37Mn3Al2PbSi (CW713R) |
approx kg/m |
| 43 | ✚ | 12,3 | ||
| 45 | ✔ | ✔ | ✔ | 13,5 |
| 48 | ✔ | 15,4 | ||
| 50 | ✔ | ✔ | ✔ | 16,7 |
| 52 | ✔ | 18,1 | ||
| 55 | ✔ | ✔ | ✔ | 20,2 |
| 60 | ✔ | ✔ | ✔ | 24,0 |
| 65 | ✔ | ✔ | ✔ | 28,2 |
| 70 | ✔ | ✔ | ✔ | 32,7 |
size (mm) |
CuZn39Pb3 (CW614N | MS58) |
CuZn35Ni3Mn2AlPb (CW710R) |
CuZn37Mn3Al2PbSi (CW713R) |
approx kg/m |
| 75 | ✔ | ✔ | 37,5 | |
| 80 | ✔ | ✔ | ✔ | 42,7 |
| 85 | ✔ | ✔ | 48,2 | |
| 90 | ✔ | ✔ | ✔ | 54,1 |
| 95 | ✔ | 60,2 | ||
| 100 | ✔ | ✔ | ✔ | 66,8 |
| 105 | ✔ | 73,6 | ||
| 110 | ✔ | ✔ | 80,8 | |
| 120 | ✔ | ✔ | ✔ | 96,1 |
size (mm) |
CuZn39Pb3 (CW614N | MS58) |
CuZn35Ni3Mn2AlPb (CW710R) |
CuZn37Mn3Al2PbSi (CW713R) |
approx kg/m |
| 125 | ✔ | 104,3 | ||
| 130 | ✔ | ✔ | 112,8 | |
| 140 | ✔ | ✔ | 130,8 | |
| 150 | ✔ | ✔ | 150,2 | |
| 160 | ✔ | ✔ | 170,9 | |
| 170 | ✔ | 192,9 | ||
| 180 | ✔ | 216,3 | ||
| 190 | ✔ | 241,0 | ||
| 200 | ✚ | 267,0 | ||
size (mm) |
CuZn39Pb3 (CW614N | MS58) |
CuZn35Ni3Mn2AlPb (CW710R) |
CuZn37Mn3Al2PbSi (CW713R) |
approx kg/m |
| 203 | ✔ | 275,1 | ||
| 210 | ✚ | 294,4 | ||
| 225 | ✚ | 332,0 | ||
| 230 | ✔ | 353,1 | ||
| 254 | ✔ | 430,7 | ||
| 280 | ✚ | 523,4 | ||
| 300 | ✔ | 600,8 | ||
| 320 | ✚ | 683,6 | ||
|
✔ standard | ✚ non standard, stock availble
2024-04-08 07:35
| ||||
CuZn39Pb3 (CW614N)
| EN | DIN | ||||
| Alloy | CuZn39Pb3 | CuZn39Pb3 | |||
| MS58 | |||||
| Standard | EN 12164, EN 12167 | DIN 17660, DIN 17672 | |||
| Alloy number | CW614N | 2.0401 | |||
| Chemical composition | |||||
| Cu | 57,0 - 59,0 | 57,0 - 59,0 | |||
| Pb | 2,5 - 3,5 | 2,5 - 3,5 | |||
| Zn | rest | rest | |||
| kg/dm³ | ca. 8,5 | ||||
| Characteristics | High speed free machining brass. Most common used alloy. Very good machinability. | ||||
CuZn21Si3P (CW724R)
| EN | |||
| Alloy | CuZn21Si3P | ||
| Standard | EN 12164, EN 12167 | ||
| Alloy number | CW724R | ||
| Chemical composition | |||
| Cu | 75,0 - 77,0 | ||
| Zn | rest | ||
| Pb | 0,10 max. | ||
| Sn | 0,3 max. | ||
| Fe | 0,3 max. | ||
| Ni | 0,2 max. | ||
| Al | 0,05 max. | ||
| Mn | 0,05 max. | ||
| P | 0,02 - 0,10 | ||
| Si | 2,7 - 3,5 | ||
| kg/dm³ | ca. 8,3 | ||
| Characteristics | Ecobrass. This is a lead-free alloy. Good workability, high wear resistance, good recyclability, very good corrosion resistance and good malleability. Approved for drinking water applications | ||
CuZn37Mn3Al2PbSi (CW713R) | CuZn40Al2
| EN | DIN | ||||
| Alloy | CuZn37Mn3Al2PbSi | CuZn40Al2 | |||
| SoMs58Al2 | |||||
| Standard | EN 12164, EN 12167 | DIN 17660, DIN 17662 | |||
| Alloy number | CW713R | 2.0550 | |||
| Chemical composition | |||||
| Cu | 57,0 - 59,0 | 56,5 - 59,0 | |||
| Si | 0,3 - 1,3 | 0,3 - 1,0 | |||
| Zn | rest | rest | |||
| Al | 1,3 - 2,3 | 1,3 - 2,3 | |||
| Mn | 1,5 - 3,0 | 1,4 - 2,6 | |||
| Ni | 1,0 max. | 2,0 max. | |||
| Pb | 0,2 - 0,8 | 0,8 max. | |||
| Fe | 1,0 max. | 1,0 max. | |||
| Sn | 0,4 max. | 0,5 max. | |||
| kg/dm³ | ca. 8,1 | ||||
| Characteristics | High mechanical values and good wear resistance. | ||||
CuZn35Ni3Mn2AlPb (CW710R) | CuZn35Ni2
| DIN | EN | ||||
| Alloy | CuZn35Ni3Mn2AlPb | CuZn35Ni2 | |||
| SoMs59 | |||||
| Standard | EN 12163 | DIN 17660, DIN 17672 | |||
| Alloy number | CW710R | 2.0540 | |||
| Chemical composition | |||||
| Cu | 58,0 - 60,0 | 58,0 - 61,0 | |||
| Ni | 2,0 - 3,0 | 2,0 - 3,0 | |||
| Zn | rest | rest | |||
| Al | 0,3 - 1,3 | 0,3 - 1,5 | |||
| Mn | 1,5 - 2,5 | 1,5 - 2,5 | |||
| Pb | 0,2 - 0,8 | 0,8 max. | |||
| Fe | 0,5 max. | 0,5 max. | |||
| Sn | 0,5 max. | 0,5 max. | |||
| kg/dm³ | ca. 8,3 | ||||
| Characteristics | |||||
CuZn37 (CW508L)
| EN | DIN | ||||
| Alloy | CuZn37 | CuZn37 | |||
| MS63 | |||||
| Standard | EN 12163 | DIN 17660 | |||
| Alloy number | CW508L | 2.0321 | |||
| Chemical composition | |||||
| Cu | 62,0 - 64,0 | 62,0 - 64,0 | |||
| Zn | rest | rest | |||
| kg/dm³ | ca. 8,4 | ||||
| Characteristics | Most common brass for plates, suitable for simple forming. | ||||
CuZn25Al5Mn4Fe3-C (CC762S) | CuZn25Al5
| EN | DIN | ||||
| Alloy | CuZn25Al5Mn4Fe3-C | CuZn25Al5 | |||
| SoMs75 | |||||
| Standard | EN 1982 | DIN 1709 | |||
| Alloy number | CC762S | 2.0598 | |||
| Chemical composition | Mechanical properties | ||||
| Cu | 60,0 - 67,0 | 60,0 - 67,0 | EN | DIN | |
| Zn | rest | rest | Rm | ≥ 750 | ≥ 750 |
| Al | 3,0 - 7,0 | 3,0 - 7,0 | Rp 0,2 | ≥ 480 | ≥ 480 |
| Fe | 1,5 - 4,0 | 1,5 - 4,0 | A5 | ≥ 5 | ≥ 5 |
| Mn | 2,5 - 5,0 | 2,5 - 5,0 | HB | ≥ 190 | ≥ 190 |
| Ni | 3,0 max. | 3,0 max. | |||
| kg/dm³ | ca. 8,2 | ||||
| Condition | GZ | GZ / GC | |||
| Characteristics | Alloy suitable for high static loads at low circumferential speeds. | ||||
Downloads
Click the link below for an overview of available downloads. Eg. our ISO 9001:2015 certificaet, declaration of conformity for the food processing industry for Concast 954, our brochures and our general terms-and-conditions
Downloads >Links
Disclaimer >Privacy >
Contact
Elcas BVLinschotenstraat 59
3044AV Rotterdam
the Netherlands
| tel | +31 (0)10 462 77 99 |
| fax | +31 (0)10 262 36 11 |
| elcas@elcas.nl |
