HEXAGON BRASS
CuZn39Pb3 (CW614N) | CuZn35Ni3Mn2AlPb (CW710R)

✔ standard | ✚ non standard, stock availble

A/F (mm)	CuZn39Pb3 (CW614N \| MS58)	CuZn35Ni3Mn2AlPb (CW710R)	approx kg/m
5	✔		0,2
6	✔		0,3
7	✔		0,4
8	✔		0,5
9	✔		0,6
10	✔		0,7
11	✔		0,9
12	✔		1,1
13	✔		1,2
14	✔	✔	1,4
A/F (mm)	CuZn39Pb3 (CW614N \| MS58)	CuZn35Ni3Mn2AlPb (CW710R)	approx kg/m
15	✔		1,7
16	✔		1,9
17	✔	✔	2,1
18	✔		2,4
19	✔	✔	2,7
20	✔		2,9
21	✔		3,2
22	✔	✔	3,6
23	✔		3,9
A/F (mm)	CuZn39Pb3 (CW614N \| MS58)	CuZn35Ni3Mn2AlPb (CW710R)	approx kg/m
24	✔	✔	4,2
25	✔		4,6
26	✚		5,0
27	✔	✔	5,4
28	✔		5,8
30	✔	✔	6,6
32	✔	✔	7,5
34	✔		8,5
36	✔	✔	9,5
A/F (mm)	CuZn39Pb3 (CW614N \| MS58)	CuZn35Ni3Mn2AlPb (CW710R)	approx kg/m
38	✔		10,6
40	✔		11,8
41	✔	✔	12,4
42	✔		13,0
46	✔	✔	15,6
50	✔	✔	18,4
55	✔	✔	22,3
60	✔	✔	26,5
65	✔		31,1
A/F (mm)	CuZn39Pb3 (CW614N \| MS58)	CuZn35Ni3Mn2AlPb (CW710R)	approx kg/m
70	✔		36,1
75	✔		41,4
80	✔		47,1
90	✔		59,6
100	✔		73,6
✔ standard \| ✚ non standard, stock availble 2024-04-08 07:35

CuZn39Pb3 (CW614N)

	EN	DIN
Alloy	CuZn39Pb3	CuZn39Pb3
		MS58
Standard	EN 12164, EN 12167	DIN 17660, DIN 17672
Alloy number	CW614N	2.0401

Chemical composition

Cu	57,0 - 59,0	57,0 - 59,0
Pb	2,5 - 3,5	2,5 - 3,5
Zn	rest	rest

kg/dm³	ca. 8,5
Characteristics	High speed free machining brass. Most common used alloy. Very good machinability.

	EN
Alloy	CuZn21Si3P
Standard	EN 12164, EN 12167
Alloy number	CW724R

Chemical composition

Cu	75,0 - 77,0
Zn	rest
Pb	0,10 max.
Sn	0,3 max.
Fe	0,3 max.
Ni	0,2 max.
Al	0,05 max.
Mn	0,05 max.
P	0,02 - 0,10
Si	2,7 - 3,5

kg/dm³	ca. 8,3
Characteristics	Ecobrass. This is a lead-free alloy. Good workability, high wear resistance, good recyclability, very good corrosion resistance and good malleability. Approved for drinking water applications

	EN	DIN
Alloy	CuZn37Mn3Al2PbSi	CuZn40Al2
		SoMs58Al2
Standard	EN 12164, EN 12167	DIN 17660, DIN 17662
Alloy number	CW713R	2.0550

Chemical composition

Cu	57,0 - 59,0	56,5 - 59,0
Si	0,3 - 1,3	0,3 - 1,0
Zn	rest	rest
Al	1,3 - 2,3	1,3 - 2,3
Mn	1,5 - 3,0	1,4 - 2,6
Ni	1,0 max.	2,0 max.
Pb	0,2 - 0,8	0,8 max.
Fe	1,0 max.	1,0 max.
Sn	0,4 max.	0,5 max.

kg/dm³	ca. 8,1
Characteristics	High mechanical values and good wear resistance.

	EN	DIN
Alloy	CuZn37	CuZn37
		MS63
Standard	EN 12163	DIN 17660
Alloy number	CW508L	2.0321

Chemical composition

Cu	62,0 - 64,0	62,0 - 64,0
Zn	rest	rest

kg/dm³	ca. 8,4
Characteristics	Most common brass for plates, suitable for simple forming.

	EN	DIN
Alloy	CuZn25Al5Mn4Fe3-C	CuZn25Al5
		SoMs75
Standard	EN 1982	DIN 1709
Alloy number	CC762S	2.0598

Chemical composition			Mechanical properties

Cu	60,0 - 67,0	60,0 - 67,0		EN	DIN
Zn	rest	rest	Rm	≥ 750	≥ 750
Al	3,0 - 7,0	3,0 - 7,0	Rp 0,2	≥ 480	≥ 480
Fe	1,5 - 4,0	1,5 - 4,0	A5	≥ 5	≥ 5
Mn	2,5 - 5,0	2,5 - 5,0	HB	≥ 190	≥ 190
Ni	3,0 max.	3,0 max.

kg/dm³	ca. 8,2
Condition	GZ	GZ / GC
Characteristics	Alloy suitable for high static loads at low circumferential speeds.