+31 (0)10 462 77 99
elcas@elcas.nl
EN
|

CALCULATOR

Bar
Square
Rectangle
Tube
Hexagon
RESULT

Calculator version 1.1
Copyright © 2008 Elcas
No rights may be derived from the results of calculations

CONTACTFORMULIER

OUR STOCK ALUMINIUMBRONZE

Bar
Tube
Square
Rectangle
Hexagon
Calculator
Specifications CuAl10Fe5Ni5-C
(CC333G)
Specifications CuAl10Ni5Fe4
(CW307G)
Specifications CuAl10Ni3Fe2-C
(CC332G)
Specifications CuAl11Fe6Ni6-C
(CC334G)
Specifications CuAl10Fe2-C
(CC331G)
Specifications CuAl10Fe3Mn2
(CW306G)
Specifications CuAl11Fe6Ni6
(CW308G)
Back to Aluminiumbronze

SQUARE/RECTANGLE ALUMINIUMBRONZE
CuAl10Fe5Ni5-C (CC333G) | CuAl10Ni5Fe4 (CW307G)

 
✔ standard  |  ✚ non standard, stock availble

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
20 x 10 20 x 10   ✔ 1,5
20 x 15 20 x 15   ✔ 2,3
20 x 20 20 x 20   ✔ 3,0
22 x 17 20 x 15 ✚   3,0
22 x 22 20 x 20 ✔   4,2
25 x 15 25 x 15   ✔ 2,9
25 x 25 25 x 25   ✔ 4,9
30 x 10 30 x 10   ✔ 2,3
30 x 15 30 x 15   ✔ 3,5
30 x 20 30 x 20   ✔ 4,6

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
30 x 25 30 x 25   ✚ 5,7
30 x 30 30 x 30   ✔ 6,8
32 x 12 30 x 10 ✔   3,1
32 x 22 30 x 20 ✔   5,7
32 x 32 30 x 30 ✔   8,8
35 x 35 35 x 35   ✔ 9,3
40 x 10 40 x 10   ✔ 3,0
40 x 15 40 x 15   ✔ 4,5
40 x 20 40 x 20   ✔ 6,1

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
40 x 25 40 x 25   ✔ 7,3
40 x 40 40 x 40   ✔ 12,2
42 x 12 40 x 10 ✔   3,9
42 x 22 40 x 20 ✔   8,0
42 x 27 40 x 25 ✚   9,7
43 x 43 40 x 40 ✔   14,8
45 x 45 45 x 45   ✔ 15,4
50 x 6 50 x 6   ✔ 2,3
50 x 10 50 x 10   ✔ 3,8

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
50 x 15 50 x 15   ✔ 5,7
50 x 20 50 x 20   ✔ 7,6
50 x 25 50 x 25   ✔ 9,8
50 x 35 50 x 35   ✚ 13,3
50 x 40 47 x 37   ✔ 15,2
50 x 50 50 x 50   ✔ 19,0
52 x 12 50 x 10 ✔   4,9
52 x 17 50 x 15 ✚   7,7
52 x 25 50 x 22 ✚   10,1

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
52 x 32 50 x 30 ✔   14,1
52 x 52 50 x 50 ✔   22,6
55 x 20 52 x 17 ✚   9,2
57 x 22 55 x 20 ✚   9,8
60 x 10 60 x 10   ✔ 5,6
60 x 15 60 x 15   ✔ 7,9
60 x 20 60 x 20   ✔ 9,5
60 x 25 60 x 25   ✚ 11,4
60 x 30 60 x 30   ✔ 13,7

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
60 x 60 60 x 60   ✔ 27,4
70 x 30 70 x 30   ✚ 16,0
80 x 10 80 x 10   ✔ 6,2
80 x 15 80 x 15   ✔ 9,4
82 x 42 80 x 40 ✔   28,7
85 x 25 85 x 25   ✔ 17,9
100 x 20 100 x 20   ✚ 15,2
102 x 38 100 x 35 ✚   30,5
102 x 42 100 x 40 ✚   35,6

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
102 x 62 100 x 60 ✚   52,1
102 x 102 100 x 100 ✔   81,2
103 x 13 100 x 10 ✚   9,6
105 x 62 102 x 60 ✚   51,8
122 x 122 120 x 120 ✔   116,1
132 x 62 130 x 60 ✚   63,8
139 x 83 135 x 80 ✚   87,0
142 x 37 140 x 35 ✚   41,0
152 x 152 150 x 150 ✔   180,2

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
154 x 52 150 x 50 ✚   65,2
195 x 19 192 x 15 ✚   27,0
195 x 32 192 x 30 ✚   48,7
202 x 202 200 x 200 ✚   324,6
220 x 117 217 x 115 ✚   203,0
312 x 12 310 x 10 ✔   29,5
312 x 14 310 x 12 ✔   35,0
312 x 17 310 x 15 ✔   42,0
312 x 22 310 x 20 ✔   54,0

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
312 x 27 310 x 25 ✔   66,0
312 x 32 310 x 30 ✔   78,0
312 x 37 310 x 35 ✔   90,0
312 x 42 310 x 40 ✔   108,1
312 x 47 312 x 47 ✚   115,0
312 x 52 310 x 50 ✔   126,5
312 x 62 310 x 30 ✔   150,9
312 x 72 310 x 70 ✔   175,2
312 x 82 310 x 80 ✔   202,6

cast size
(mm)
finished size
(mm)		 CuAl10Fe5Ni5-C
(CC333G)		 CuAl10Ni5Fe4
(CW307G)		 approx
kg/m
312 x 92 310 x 90 ✔   223,9
312 x 102 310 x 100 ✔   251,5
312 x 122 310 x 120 ✔   303,0
312 x 155 310 x 150 ✔   377,2
 ✔ standard  |  ✚ non standard, stock availble
2024-09-19 18:05

Tolerances and Machining allowances

Tolerances   Outside Inside
CuAl10Fe5Ni5-C Bar and tube + 0 / + 2 mm - 0 / - 2 mm
CuAl10Ni5Fe4 Roundbar up to Ø 52 mm
Roundbar Ø 57 t/m Ø 77 mm
Roundbar Ø 83 t/m Ø 98 mm
Roundbar Ø 103 t/m Ø 173 mm 		h11
± 0,7 mm
± 1 mm
± 1,5 mm
  


The stated finished size applies for lengths up to 250 mm and diameters up to 172 mm. For diameters above 172 mm and / or lengths above 250 mm, a larger machining allowance is required.

Standaardlengths: approx. 3000 mm, 2000 mm, 1000 mm en 500 mm.

Our foundries can produce centrifugally cast (flanged)tubes to any desired size, up to a diameter of & Oslash;2000 mm and lengths of 3000 mm in all common compositions.

CuAl10Fe5Ni5-C (CC333G) | CuAl10Ni

  EN DIN  
Alloy CuAl10Fe5Ni5-C CuAl10Ni  
    NiAlBz-F60  
Standard EN 1982 DIN 1714  
Alloy number CC333G 2.0975  
 
Chemical composition   Mechanical properties
 
Cu 76,0 - 83,0 76,0 min.   EN DIN
Al 8,5 - 10,5 8,5 - 11,0 Rm ≥ 650 ≥ 700
Ni 4,0 - 6,0 4,0 - 6,5 Rp 0,2 ≥ 280 ≥ 300
Fe 4,0 - 5,5 3,5 - 5,5 A5 ≥ 13 ≥ 13
Mn 3,0 max. 3,0 max. HB ≥ 150 ≥ 160
 
kg/dm³ ca. 7,8  
Condition GC, GK, GZ GC, GK, GZ  

CuAl10Ni5Fe4 (CW307G)

  EN DIN  
Alloy CuAl10Ni5Fe4 CuAl10Ni5Fe4  
Standard EN 12163 DIN 17665, 17672  
Alloy number CW307G 2.0966  
 
Chemical composition   Mechanical properties 1)
 
Cu rest rest   EN (R680) EN (R740) DIN
Al 8,5 - 11,0 8,5 - 11,0 Rm ≥ 680 ≥ 740 ≥ 640
Ni 4,0 - 6,0 4,0 - 6,0 Rp 0,2 ≥ 320 ≥ 400 ≥ 270
Fe 2,0 - 5,0 3,0 - 5,0 A5 ≥ 10 ≥ 8 ≥ 15
Mn 1,0 max. 1,5 max. HB ≤170 ≤ 200 ≥ 180
 
kg/dm³ ca. 7,8  
Condition Extruded and drawn up to Ø52 mm
 
Remarks 1) mechanical properties depend on the size and specification of the alloy. Given values are for the most common alloy.

CuAl10Ni3Fe2-C (CC332G) | CuAl9Ni

  EN DIN  
Alloy CuAl10Ni3Fe2-C CuAl9Ni  
    NiAlBz-F50  
Standard EN 1982 DIN 1714  
Alloy number CC332G 2.0970  
 
Chemical composition   Mechanical properties
 
Cu 80,0 - 86,0 82,0 min.   EN DIN
Al 8,5 - 10,0 8,5 - 10,5 Rm ≥ 550 ≥ 530
Ni 1,5 - 4,0 1,5 - 4,0 Rp 0,2 ≥ 220 ≥ 230
Fe 1,0 - 3,0 1,0 - 3,0 A5 ≥ 20 ≥ 20
Mn 2,0 max. 2,5 max. HB ≥ 120 ≥ 120
 
kg/dm³ ca. 7,5  
Condition GC, GZ  

CuAl11Fe6Ni6-C (CC334G) | CuAl11Ni

  EN DIN  
Alloy CuAl11Fe6Ni6-C CuAl11Ni  
    NiAlBz-F68  
Standard EN 1982 DIN 1714  
Alloy number CC334G 2.0980  
 
Chemical composition   Mechanical properties
 
Cu 72,0 - 78,0 73,0 min.   EN DIN
Al 10,0 - 12,0 9,0 - 12,3 Rm ≥ 750 ≥ 750
Ni 4,0 - 7,5 5,0 - 7,5 Rp 0,2 ≥ 380 ≥ 400
Fe 4,0 - 7,0 4,0 - 7,0 A5 ≥ 5 ≥ 5
Mn 2,5 max. 2,5 max. HB ≥ 185 ≥ 185
 
kg/dm³ ca. 7,6  
Condition GZ GC  
Characteristics Alternative to CuAl10Ni, however, this material has higher cavitation and wear resistance values. Used for bearings under high loads and machine parts

CuAl10Fe2-C (CC331G) | CuAl10Fe

  EN DIN  
Alloy CuAl10Fe2-C CuAl10Fe  
    FeAlBz-F50  
Standard EN 1982 DIN 1714  
Alloy number CC331G 2.0940  
 
Chemical composition   Mechanical properties
 
Cu 83,0 - 89,5 83,0 min.   EN DIN
Al 8,5 - 10,5 8,0 - 11,0 Rm ≥ 550 ≥ 550
Ni 1,5 max. 3,0 max. Rp 0,2 ≥ 200 ≥ 200
Fe 1,5 - 3,5 2,0 - 4,0 A5 ≥ 15 ≥ 15
Mn 1,0 max. 1,0 max. HB ≥ 130 ≥ 115
 
kg/dm³ ca. 7,5  
Condition GC, GZ GZ  
Characteristics Aluminumbronze with higher tensile strength, good wear resistance and fine microstructure. Due to the low nickel content, this alloy is not corrosion resistant.
See also Concast 954.

CuAl10Fe3Mn2 (CW306G) | CuAl10Fe3Mn2

  EN DIN  
Alloy CuAl10Fe3Mn2 CuAl10Fe3Mn2  
Standard EN 12163, 12167, 12420 DIN 17665, 17672  
Alloy number CW306G 2.0936  
 
Chemical composition   Mechanical properties 1)
 
Cu rest rest   EN DIN
Al 9,0 - 11,0 8,5 - 11,0 Rm ≥ 590 ≥ 590
Ni 2,0 - 4,0 2,0 - 4,0 Rp 0,2 ≥ 330 ≥ 250
Fe 1,5 - 3,5 1,5 - 3,5 A5 ≥ 12 ≥ 12
Mn 1,0 max. 1,0 max. HB   ≥ 150
 
kg/dm³ ca. 7,6  
Condition Drawn or pressed depending on the size
Condition Construcion material used in chemical machine building and fire resistant parts.
 
Remarks 1) mechanical properties depend on the size and specification of the alloy. Given values are for the most common alloy.

CuAl11Fe6Ni6 (CCW308G) | CuAl11Ni6Fe6

  EN DIN  
Alloy CuAl11Fe6Ni6 CuAl11Ni6Fe5  
Standard EN 12163, 12167, 12420 DIN 17665, 17672  
Alloy number CW308G 2.0978  
 
Chemical composition   Mechanical properties 1)
 
Cu rest rest   EN DIN
Al 10,5 - 12,0 10,5 - 12,5 Rm ≥ 590 ≥ 590
Ni 5,0 - 7,0 5,0 - 7,5 Rp 0,2 ≥ 330 ≥ 250
Fe 5,0 - 7,0 4,8 - 7,3 A5 ≥ 12 ≥ 12
Mn 1,5 max. 1,5 max. HB   ≥ 150
 
kg/dm³ ca. 7,4  
Condition Drawn or pressed depending on the size
Characteristics Construction and bearing material with good resistance to corrosion, cavitation and mechanical wear, even at higher temperatures. Often used in hydraulic control parts, gears and in shipbuilding.
 
Remarks 1) mechanical properties depend on the size and specification of the alloy. Given values are for the most common alloy.

Downloads

Click the link below for an overview of available downloads. Eg. our ISO 9001:2015 certificaet, declaration of conformity for the food processing industry for Concast 954, our brochures and our general terms-and-conditions

Downloads >

Links

Disclaimer >

Privacy >

Contact

Elcas BV
Linschotenstraat 59
3044AV Rotterdam
the Netherlands

tel+31 (0)10 462 77 99
fax+31 (0)10 262 36 11
mailelcas@elcas.nl

Enquiry Enquiry
Enquiry Enquiry