A/F (mm) |
CuAl10Ni5Fe4 (CW307G) |
approx kg/m |
14 | ✔ | 1,3 |
17 | ✔ | 1,9 |
19 | ✔ | 2,3 |
22 | ✔ | 3,2 |
24 | ✔ | 3,8 |
27 | ✔ | 5,0 |
30 | ✔ | 5,9 |
32 | ✔ | 6,7 |
36 | ✔ | 8,5 |
41 | ✔ | 11,1 |
A/F (mm) |
CuAl10Ni5Fe4 (CW307G) |
approx kg/m |
46 | ✔ | 13,9 |
50 | ✔ | 16,5 |
55 | ✔ | 19,9 |
60 | ✔ | 24,0 |
✔ standard | ✚ non standard, stock availble
2023-09-23 13:05
|
EN | DIN | ||||||
Alloy | CuAl10Fe5Ni5-C | CuAl10Ni | |||||
NiAlBz-F60 | |||||||
Standard | EN 1982 | DIN 1714 | |||||
Alloy number | CC333G | 2.0975 | |||||
Chemical composition | Mechanical properties | ||||||
Cu | 76,0 - 83,0 | 76,0 min. | EN | DIN | |||
Al | 8,5 - 10,5 | 8,5 - 11,0 | Rm | ≥ 650 | ≥ 700 | ||
Ni | 4,0 - 6,0 | 4,0 - 6,5 | Rp 0,2 | ≥ 280 | ≥ 300 | ||
Fe | 4,0 - 5,5 | 3,5 - 5,5 | A5 | ≥ 13 | ≥ 13 | ||
Mn | 3,0 max. | 3,0 max. | HB | ≥ 150 | ≥ 160 | ||
kg/dm³ | ca. 7,8 | ||||||
Condition | GC, GK, GZ | GC, GK, GZ |
EN | DIN | |||||
Alloy | CuAl10Ni5Fe4 | CuAl10Ni5Fe4 | ||||
Standard | EN 12163 | DIN 17665, 17672 | ||||
Alloy number | CW307G | 2.0966 | ||||
Chemical composition | Mechanical properties 1) | |||||
Cu | rest | rest | EN (R680) | EN (R740) | DIN | |
Al | 8,5 - 11,0 | 8,5 - 11,0 | Rm | ≥ 680 | ≥ 740 | ≥ 640 |
Ni | 4,0 - 6,0 | 4,0 - 6,0 | Rp 0,2 | ≥ 320 | ≥ 400 | ≥ 270 |
Fe | 2,0 - 5,0 | 3,0 - 5,0 | A5 | ≥ 10 | ≥ 8 | ≥ 15 |
Mn | 1,0 max. | 1,5 max. | HB | ≤170 | ≤ 200 | ≥ 180 |
kg/dm³ | ca. 7,8 | |||||
Condition | Extruded and drawn up to Ø52 mm | |||||
Remarks | 1) mechanical properties depend on the size and specification of the alloy. Given values are for the most common alloy. |
EN | DIN | ||||
Alloy | CuAl10Ni3Fe2-C | CuAl9Ni | |||
NiAlBz-F50 | |||||
Standard | EN 1982 | DIN 1714 | |||
Alloy number | CC332G | 2.0970 | |||
Chemical composition | Mechanical properties | ||||
Cu | 80,0 - 86,0 | 82,0 min. | EN | DIN | |
Al | 8,5 - 10,0 | 8,5 - 10,5 | Rm | ≥ 550 | ≥ 530 |
Ni | 1,5 - 4,0 | 1,5 - 4,0 | Rp 0,2 | ≥ 220 | ≥ 230 |
Fe | 1,0 - 3,0 | 1,0 - 3,0 | A5 | ≥ 20 | ≥ 20 |
Mn | 2,0 max. | 2,5 max. | HB | ≥ 120 | ≥ 120 |
kg/dm³ | ca. 7,5 | ||||
Condition | GC, GZ |
EN | DIN | ||||
Alloy | CuAl11Fe6Ni6-C | CuAl11Ni | |||
NiAlBz-F68 | |||||
Standard | EN 1982 | DIN 1714 | |||
Alloy number | CC334G | 2.0980 | |||
Chemical composition | Mechanical properties | ||||
Cu | 72,0 - 78,0 | 73,0 min. | EN | DIN | |
Al | 10,0 - 12,0 | 9,0 - 12,3 | Rm | ≥ 750 | ≥ 750 |
Ni | 4,0 - 7,5 | 5,0 - 7,5 | Rp 0,2 | ≥ 380 | ≥ 400 |
Fe | 4,0 - 7,0 | 4,0 - 7,0 | A5 | ≥ 5 | ≥ 5 |
Mn | 2,5 max. | 2,5 max. | HB | ≥ 185 | ≥ 185 |
kg/dm³ | ca. 7,6 | ||||
Condition | GZ | GC | |||
Characteristics | Alternative to CuAl10Ni, however, this material has higher cavitation and wear resistance values. Used for bearings under high loads and machine parts |
EN | DIN | ||||
Alloy | CuAl10Fe2-C | CuAl10Fe | |||
FeAlBz-F50 | |||||
Standard | EN 1982 | DIN 1714 | |||
Alloy number | CC331G | 2.0940 | |||
Chemical composition | Mechanical properties | ||||
Cu | 83,0 - 89,5 | 83,0 min. | EN | DIN | |
Al | 8,5 - 10,5 | 8,0 - 11,0 | Rm | ≥ 550 | ≥ 550 |
Ni | 1,5 max. | 3,0 max. | Rp 0,2 | ≥ 200 | ≥ 200 |
Fe | 1,5 - 3,5 | 2,0 - 4,0 | A5 | ≥ 15 | ≥ 15 |
Mn | 1,0 max. | 1,0 max. | HB | ≥ 130 | ≥ 115 |
kg/dm³ | ca. 7,5 | ||||
Condition | GC, GZ | GZ | |||
Characteristics | Aluminumbronze with higher tensile strength, good wear resistance and fine microstructure. Due to the low nickel content, this alloy is not corrosion resistant. See also Concast 954. |
EN | DIN | ||||
Alloy | CuAl10Fe3Mn2 | CuAl10Fe3Mn2 | |||
Standard | EN 12163, 12167, 12420 | DIN 17665, 17672 | |||
Alloy number | CW306G | 2.0936 | |||
Chemical composition | Mechanical properties 1) | ||||
Cu | rest | rest | EN | DIN | |
Al | 9,0 - 11,0 | 8,5 - 11,0 | Rm | ≥ 590 | ≥ 590 |
Ni | 2,0 - 4,0 | 2,0 - 4,0 | Rp 0,2 | ≥ 330 | ≥ 250 |
Fe | 1,5 - 3,5 | 1,5 - 3,5 | A5 | ≥ 12 | ≥ 12 |
Mn | 1,0 max. | 1,0 max. | HB | ≥ 150 | |
kg/dm³ | ca. 7,6 | ||||
Condition | Drawn or pressed depending on the size | ||||
Condition | Construcion material used in chemical machine building and fire resistant parts. | ||||
Remarks | 1) mechanical properties depend on the size and specification of the alloy. Given values are for the most common alloy. |
EN | DIN | ||||
Alloy | CuAl11Fe6Ni6 | CuAl11Ni6Fe5 | |||
Standard | EN 12163, 12167, 12420 | DIN 17665, 17672 | |||
Alloy number | CW308G | 2.0978 | |||
Chemical composition | Mechanical properties 1) | ||||
Cu | rest | rest | EN | DIN | |
Al | 10,5 - 12,0 | 10,5 - 12,5 | Rm | ≥ 590 | ≥ 590 |
Ni | 5,0 - 7,0 | 5,0 - 7,5 | Rp 0,2 | ≥ 330 | ≥ 250 |
Fe | 5,0 - 7,0 | 4,8 - 7,3 | A5 | ≥ 12 | ≥ 12 |
Mn | 1,5 max. | 1,5 max. | HB | ≥ 150 | |
kg/dm³ | ca. 7,4 | ||||
Condition | Drawn or pressed depending on the size | ||||
Characteristics | Construction and bearing material with good resistance to corrosion, cavitation and mechanical wear, even at higher temperatures. Often used in hydraulic control parts, gears and in shipbuilding. | ||||
Remarks | 1) mechanical properties depend on the size and specification of the alloy. Given values are for the most common alloy. |